Our ceramic strip heaters are made from highly compact refractory material, which conducts heat from the resistance wire quickly to the sheath. This results in low internal temperatures and long heater life. Precise placement of the Ni-chrome wire provides uniform sheath temperature across the entire length of the heater.
Features - Stainless steel sheath
- Maximum temperature : 600C.
- Threaded post terminals at one end or at each end of heaters.
- Ceramic terminals covers can be provided on threaded post terminals.
- Minimum width :1 1/2"
- Thickness : 3/8"
- Maximum Watt density : 30Watts / Sq. Inch.
|
Applications - Tanks
- Platens & other surface heating applications.
- Freezing & protecting the moisture in control panels.
|
Our Finned Ceramic Strip Heaters have highly compressed, rugged design structure as that of Ceramic Strip Heaters, with additional 1 3/8" x 2" fins. Fins increase the heat transfer from the surface area to allow higher wattages than standard strip heaters.
Features - Constructed from SS sheath with galvanized fins.
|
Applications - Convection air heating
- Processes requiring high velocity air stream.
|
These types of Ceramic Mica Strip Heaters are most versatile, efficient and economical. Mica core produces a thin, efficient heater in flat design and a wide range of dimensions & configurations are possible in these unit
Features and size - Hot plates
- Sealing equipment
- Hot stamping
- Dies, molds & other surface heating application.
|
Specifications - Width over 1". 12" lead wires standard
- Widths over 1- 1/2". Requires 1-1/2" cold section at terminal end.
- For Use where surface contact on both sides of heater is necessary.
- Tapped Terminals.
- Mica Strip Heaters with lead modifications.
|
© Ace Heat Tech. All Rights Reserved (Terms of
Use)