Short Wave Infrared Heaters

Short Wave IR Lamp transmits heat in the form of electromagnetic waves at a velocity of approximately 3,00,000 Km/Sec i.e., at the speed of light.

These lamps are not only the fastest in transmitting heat but are most suitable for specific applications involving vacuum technology and dust free (clean room) conditions.

» Send Enquiry

Advantage

Heating is done by radiation, this eliminates loss of energy used for heating media and heat loss due to convection. Here the infrared waves penetrate the material, on which it falls and delivers the heat directly to that material.

Models Available
Short wave IR lamps are available in different lengths from 5" to 30" or as per customer specifications.

Applications

PET preform heating in stretch blow molding machines Printing ink drying in offset machines Paper coating drying Pre - heating prior to embossing Screen printing curing on T - shirts Textiles and many more

• ACE HEAT TECH infrared modules are the ideal solution for the application of infrared heat technology.
• 
  
• They save the user design costs and time and are substantially less expensive than the complete infrared systems.
• 
  
• They are complete and ready for the operation.
• 
  
• This provides advantages for both the, user while installing in to the existing systems and for the planing / project engineers.
• 
  
• Infrared modules can be individually regulated, controlled and ventilated.
• 
  
• Because of its modular construction it is possible to make the heating panels of practically any size with heaters length up to 40
• 
  

  » Send Enquiry

  Applications
  

  Curing of paint Powder coating Lacquers Drying Printing ink Drying Glaze on Ceramic Tiles Drying Gumming Sheets Drying Adhesives Tapes Latex paper Textile Car body works

This is made up of 8-shape high-purity clear quartz twin tube, each tube has Heating Coil of Tungsten material which runs in U shape in the tube which is filled with halogen gas.

Power Density up to 150KW/m2 is achieved. Heating up and cooling down time is approximately one second. These heaters are available with gold reflector and without reflector. Reflector is in the form of gold coating on outer rear side of the tube. Due to reflector heat loss from backside is prevented and thus power saving is achieved. This also results in making surrounding work area cooler. This also increases the efficiency and directionality of the heater. There are two standard sizes 11 mm x 23 mm and 15 mm x 32 mm in cross section. Maximum length available is 2000 mm.

» Send Enquiry