We manufacture and supply superior quality medium wave infrared heater that consists of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The quartz tubing is terminated with ceramic insulating caps that are specially designed to allow the quartz tubing to breathe. The ceramic caps are tightly fastened to the quartz tube with high temperature cement that allows the quartz to breathe. Made of high quality material, these are superior in performance and offer long serving life.
Salient Features: - Quartz infrared heater is available in diameters of 8, 10, 12, 15 and 19 mm
- Available in lengths from 300 to 1500 mm
- Can be used only in horizontal position
- Fitted with specially designed heating coil to ensure longer life
- Least maintenance required
|
Applications: Our medium wave infrared lamps have found applications in
- Shrink Packaging Machines
- Lamination Industries
- Drying Textiles
- Curing Rubber
|
Our medium wave infrared heating modules are configured with a resistance wire, which is enclosed in a Quartz Tube of 8mm outer diameter. The quartz tubes are placed parallel to each other and are mounted in a special housing. The size of this heater is such that they can replace Ceramic Infrared Heater.
Specifications: | Type Length | Width | Power Rating* |
| Full Length | 248mm 63mm | 250 to 1000W |
| Half Length | 125mm 63mm | 125 to 650W |
Applications: - Thermoforming.
- Plastic forming.
- Shrink packaging tunnels.
- Laminating.
- Curing rubber.
- Drying textiles.
- Drying lacquers and paints
|
Our Twin Tube MW IR Heater is made up of 8-shape high-purity clear quartz twin tube, with each tube having Ni-Chrome heating coil that runs in U shape in the tube.
Features: - Heating up and cooling down time is approximately 50 secs.
- Available with gold reflector and without reflector.
- The outer rear side of the tube of the reflector has the gold coating.
- Heat loss from backside is prevented by the reflector, thereby power is saved.
- Results in making surrounding work area cooler.
- Increases the efficiency and directionality of the heater.
|
Specifications: - Standard sizes (in cross section): 11 mm x 23 mm & 15 mm x 32 mm.
- Maximum length : 2000 mm.
- Power density : 60 K W / m2 can be achieved.
|
Our twin tube fast medium wave infrared heaters has a filament tungsten wire and this tube is filled with halogen gas. The round ceramic base of this heater has a lead wire of 500mm size (one end or two ends) & it is also configured with lead and insulated wires.
Specifications: We make available this type of heater in standard size of
- Outer diameter of the tube: 11×23mm transparent quartz glass
- Temp. of filament :1600
- Wave length : 1.5u - 2.0u
|
Copyright
© Ace Heat Tech, Mumbai, All Rights Reserved.