Super high temperature heaters were developed to increase the previous maximum possible surface rating of ceramic panel radiators from 64 kw/m
2 to 77 kW/m
2 This radiators, produced using the hollow casting ceramic process, are filled with thermal insulation material and have a special black gaze and a gold-plated back. At an operating temperature of 900°C, over 75% of the electrical energy supplied is transferred to the material to be heated as medium to long-wave IR radiation.
This series radiators are therefore particularly suitable for use in plant construction in which special solution have to be drawn up for the customer's specific needs and for applications requiring high outputs.
The four designs cover the power range from 300 W to 1200 W and have customary market dimensions. Existing IR equipment can therefore be retrofitted with this series radiators.
CIH with thermocouple made of Nicrome and Nickle (NiCr - Ni ) alloy. Thermocouple heater is embedded in immediate vicinity to the heating coil. The Thermocouple Heater is then connected with temperature controller to achieve desired temperature.
Advantages - With these building a temperature control system is very easy.
- The operating temperature is reached quickly and remains constant.
- This is not affected by mains voltage fluctuations or airflow.
- The temperature of elements remain constant even in case of no-load operation.
|
High Performance Electric Infrared Heaters radiators are ceramic infrared rod radiators, which can be used for operating temperatures up to 1000° C and surface ratings up to 87 kw/m
2.
This series radiators have a gold-plated ceramic parabolic reflector and transfer up to 80% of the energy supplied as infrared radiation to the material to be heated.
In this way, this radiators allow material temperatures of up to 700° c or high through speeds. The typical Operating temperature of 1000° C is reached in less than one minute.
High performance radiators are therefore particularly suitable for use in plant construction in which Special solution have to be drawn up for the customer's specific needs and for applications requiring high Outputs.
This radiators are available in two designs with 375w/115v and 750w/230v.
